Trampa Kingpin bushing 2mm
Trampa Kingpin bushing
The precision made Kingpin Bushings locate the Kingpin in a wear-free position between the hanger & Baseplate.
The precision made Kingpin Bushings locate the Kingpin in a wear-free position between the hanger & Baseplate.
The Kingpin bushings are a small item & are subjected to a lot of forces and through normal/regular use they will ultimately need replacing over time. Depending on what surface you are riding on will depend on how long these bushings will last you. So to make sure your trucks are always performing at their best inspect these Bushings regularly (preferably before riding) & in particular replace any that are showing signs of wear & from time to time replace them anyway...
The difference between the four bushings is the thickness of the base. The different base sizes are 1mm, 1.5mm, 2mm and 2.5mm. 2.5mm is the standard size we work to. As all trucks have 4 bushings this .5mm difference in each of the bushing bases allows us to bridge a maximum distance of 2mm (4x.05mm=2m) resolving any foreseeable problems.
King Pin bushings 2mm Base for Spring Trucks
Kingpin Bushings 2.5mm Base - for Spring Trucks
4x2mm & 4x2.5mm BASE Kingpin bushings for ALL Spring Trucks
These NYLON Kingpin bushings are Housed within the holes of the Baseplate & Hanger
The bushings allow the kingpin to move freely when the Truck is constructed.
Made with slightly different thickness base's which helps to bridge any tolerance issues in the construction of the truck. These special Nylon Bushings are produced using Food Industry Standard materials (the best possible!) & ensure maximum durability.
A little spray of WD40 will help the kingpin glide through the bushings and truck parts holding everything in position....< br> To maintain maximum performance of your equipment check these bushings on a regular basis and replace them if the look tired or worn out
